To ensure that road lighting consistently meets safety standards, LED streetlights must undergo periodic lighting quality inspections—typically on an annual basis. These inspections should, at a minimum, cover the following:
1. Average road surface illuminance and uniformity: Measured at grid points across the road surface using an illuminance meter.
2. Threshold Increment (TI) for glare: Assessed using a luminance meter and a glare measurement instrument.
3. Color temperature and color rendering index (CRI): Measured using a spectrometer.
4. Flicker: Evaluated using a flicker tester or a high-speed camera.
5. Luminous flux depreciation (light decay): Compared against initial values.
6. Electrical parameters: Voltage, current, power, and power factor.
7. Grounding resistance. Inspections must be conducted by a qualified third-party testing organization, which shall issue a formal inspection report.
If the results fail to meet the required standards—for instance, if the average illuminance falls below the specified maintenance level—the luminaires should be promptly repaired or replaced. Furthermore, these inspection reports serve as a basis for government authorities to evaluate the management of urban lighting. Many cities outsource such lighting inspections to professional firms and maintain databases to facilitate dynamic, ongoing management.