Cables and junction boxes for LED streetlights are directly linked to the reliability and safety of the power supply. The specific requirements are as follows:
Cables: 1) Use copper-core cables (single-core or multi-core); YJV (cross-linked polyethylene insulated) or VV (polyvinyl chloride insulated) types are recommended, with a voltage rating of 0.6/1kV. 2) Determine the conductor cross-sectional area based on current and distance—typically 4–10 mm² for main lines and 1.5–2.5 mm² for branch lines. The voltage drop should not exceed 5%. 3) Cables must feature an outer sheath that is waterproof, corrosion-resistant, and UV-resistant; armored cables must be used for sections installed via direct burial.
Junction Boxes: 1) Streetlight poles typically contain a waterproof junction box (rated IP65 or higher) to connect the power cables to the luminaire leads. 2) Terminal blocks inside the junction box should be made of flame-retardant, aging-resistant materials; vibration-proof/anti-loosening types (such as cage-clamp spring terminals) are recommended. 3) The junction box should be secured inside the pole in an easily accessible location and clearly labeled. 4) All connections must be secure and wrapped with electrical tape or heat-shrink tubing. 5) The junction box should provide sufficient internal space to facilitate future maintenance.
Grounding: The junction box must include a grounding terminal to connect the luminaire’s grounding wire to the system’s grounding conductor.
Maintenance: Inspect the junction box every two years for signs of moisture, oxidation, or loose connections; replace terminals or cables if necessary. Proper selection and installation of cables and junction boxes can prevent many common issues, such as circuit tripping or lights failing to turn on.