Most LED street lights feature an adjustable installation angle (typically between -15° and +15°), allowing for optimized lighting based on specific road conditions. Follow these steps to adjust the angle:
1. Determine the ideal tilt angle: Generally, street lights should be tilted downward by 5° to 10° so that the center of the light pattern falls on the road's centerline or slightly toward the far side. The precise angle should be calculated based on the pole height, road width, and the luminaire's light distribution curve.
2. Loosen the mounting bracket bolts: Loosen—but do not remove—the bolts securing the street light bracket to the pole.
3. Use an inclinometer: Place an inclinometer (or a leveling app on a smartphone) against a reference surface on the luminaire (usually the lens plane) and adjust the tilt angle to the target value.
4. Tighten the bolts: Once the correct angle is set, tighten the bolts to the specified torque and install anti-loosening washers.
5. Adjust the horizontal orientation: For installations on curves or at intersections, it may be necessary to adjust the horizontal angle. Loosen the vertical mounting clamp and rotate the light head to the desired orientation.
6. Verify at night: After powering on the lights at night, observe the shape and position of the light pattern on the road surface; make fine-tuned adjustments if necessary.
7. Record the angle: Note the final adjusted angle on the pole to facilitate future maintenance.
Caution: Never attempt to adjust the angle while climbing the pole. Always use an aerial work platform or a lift, and ensure that a safety harness is worn.