In cold climates, snow covering the lenses of LED streetlights can severely impair lighting performance; in some cases, the expansion of ice can even cause the glass to crack. Potential solutions include:
1. Heating the lenses: Install PTC heating elements along the edges or on the back of the lenses. These can be set to activate automatically when temperatures drop below 0°C, melting any accumulated snow. Note, however, that this consumes additional electrical power (approximately 5–10W).
2. Applying hydrophobic/ice-phobic coatings: Treat the glass surfaces with an ultra-hydrophobic coating to prevent snow from adhering.
3. Increasing the installation tilt angle: Set the streetlight at a tilt angle of 10° to 15° so that snow slides off under the force of gravity.
4. Optimizing luminaire housing design: Use a streamlined housing design to eliminate flat surfaces where snow could accumulate.
5. Regular snow removal: Clear snow manually or mechanically (though this entails high costs).
6. Using polycarbonate (PC) lenses: PC offers superior toughness and is less prone to cracking from ice expansion, though it is generally less UV-resistant than glass.
7. Increasing brightness: Boost the illuminance on the road surface, allowing the heat generated by the LED chips to melt the snow (though this is not an energy-efficient approach). The most reliable strategy is to combine low-power heating with a steep installation tilt angle.
In regions with extreme cold (such as Northeast China or Canada), it is advisable to explicitly specify the need for snow-accumulation prevention features when purchasing LED streetlights.