The LED driver power supply can generate electromagnetic interference (EMI), which may affect other electronic equipment (such as traffic signals or radio communication systems). Methods to address EMC issues include:
1. Selecting EMC-compliant drivers: Ensure that drivers have passed CISPR 15 or EN 55015 testing, confirming that their conducted and radiated emission levels fall within the prescribed limits.
2. Input filtering: Incorporate an EMI filter—consisting of common-mode chokes and X/Y capacitors—at the driver’s input stage to suppress conducted interference.
3. Shielding: Utilize a metal enclosure and ensure it is properly grounded to provide shielding against radiated interference.
4. Wiring: Route AC input lines separately from DC output lines to avoid crossing. Use shielded twisted-pair cables for dimming signal lines.
5. Grounding: Implement robust grounding to reduce common-mode interference.
6. Ferrite cores: Attach ferrite cores (beads) to cables to suppress high-frequency interference.
7. Surge Protection Devices (SPDs): The varistors within an SPD can also help absorb certain transient voltage spikes.
8. Power quality: Install reactors or active filters in the power supply circuit to mitigate harmonics.
9. Product certification: Request EMC test reports—such as those for CE or FCC certification—when procuring equipment. For large-scale street lighting projects, it is advisable to conduct pre-installation EMC testing on a sample set. If interference issues arise after installation, test the units by disconnecting them one by one to isolate the source, then replace the driver in the affected fixture.