Coastal environments contain high levels of salt spray, which causes severe corrosion to metal components. Anti-corrosion measures for LED streetlights include:
1. Housing Material: Use marine-grade aluminum alloys (such as 6063-T5 with specialized passivation) or 316L stainless steel.
2. Surface Treatment: Apply hot-dip galvanizing (for light poles) followed by powder coating (at least 80μm thick), or utilize a dual-layer protection system consisting of hot-dip galvanizing and a polyester powder coating.
3. Sealing: Use silicone rubber gaskets at all joints to ensure an ingress protection (IP) rating of IP66 or higher.
4. Fasteners: Use exclusively 316 stainless steel screws, treated with an anti-seize coating.
5. Heat Sinks: Ensure that cooling fins are not spaced too closely together, allowing rainwater to wash away accumulated salt particles.
6. Regular Cleaning: Rinse the surfaces of the fixtures with fresh water every two months to remove salt crystals.
7. Sacrificial Anodes: Install zinc blocks at the base of the light poles to provide cathodic protection.
8. Salt-Spray Tested Products: Require manufacturers to provide an ASTM B117 salt-spray test report (e.g., demonstrating no corrosion after 1,000 hours of exposure).
When purchasing, you may request that samples be tested in a simulated salt-spray environment. Since the service life of streetlights in coastal regions is typically shorter than in inland areas, prioritizing high-quality anti-corrosion measures is essential.