Glare is typically quantified using the "Threshold Increment" (TI), expressed as a percentage (%). TI represents the extent to which glare impairs a driver's ability to perceive contrast; a higher value indicates more severe glare.
To measure TI, a luminance meter is used to record the brightness of individual luminaires along the direction of the road at the driver's eye level (typically 1.5 meters). This data, combined with the background luminance, is then used to calculate the TI value according to the formula provided in CIE 115. For expressways and arterial roads, the required TI is ≤10%, while for collector and local roads, it is ≤15%. Field measurements must be conducted at night on a dry road surface using specialized equipment.
A simpler evaluation method involves marking the driver's position on the road and observing whether direct light from the luminaires enters the driver's field of vision. If a luminaire emits light above the horizontal plane—common with fixtures mounted at the top of a pole—it will generally produce glare. Opting for "full cut-off" luminaires (with a cut-off angle of ≥65°) can significantly reduce the TI value.
For existing streetlights, if residents or drivers frequently complain about blinding light, a glare meter can be used to verify the issue. If the TI exceeds the standard, the problem can be addressed by installing light shields (visors), lowering the mounting height, adjusting the installation angle, or replacing the lenses with ones that provide a narrower light distribution.