Challenge

The client previously used insufficiently bright lighting fixtures. During the sports events, the brightness was inadequate, and spectators in the back row couldn't see clearly. This was particularly problematic for television broadcasts, where the footage wasn't clear, making it difficult to follow the event. Faced with this feedback, they analyzed the situation and concluded that only a complete overhaul of the stadium's lighting system would solve the problem. Comparing many suppliers and making a comprehensive evaluation, they chose JR Lighting.

Solution

Spotlights must be extremely robust and durable because they are usually installed in stadiums or sports halls and exposed to various weather conditions. At the same time, it must be guaranteed to provide a good vision for both the athletes and the possible viewers and media or television present.

Our LED flood light JR309 lamp features an IP67 protection level, 150-180lm/w high light efficiency, 180000 lumens, and Special surface treatment to avoid rust. It can fully meet the requirements of stadium lighting, squash court lighting, and outdoor stadium lighting.



Result: Fabulous Brightness, Cost Reduction, Revenue Increase

l After adopting our lighting system solution, the brightness of the entire stadium doubled. Spectators can now clearly see the match from any seat, and they are highly satisfied with the stadium upgrade.

l Energy consumption was halved, resulting in substantial electricity savings. The long lifespan of LED lights reduces bulb damage, lowers maintenance frequency, and saves costs.

l Moreover, more sports events chose the stadium, significantly increasing its revenue.

#module-ZWc1d7JbyJ88Z{text-align:center;padding-top:0vw;padding-bottom:0vw;}


#unit-jKWH2bQhXjKqkSU [ce-data-type="text"]{text-align:left;}

Product advantages:


#unit-G1oYgCBEB0DFb6j{padding-top:0vw;}#unit-G1oYgCBEB0DFb6j [ce-data-type="text"]{text-align:left;}

1. Customized high power Lumileds LED chips, luminous efficiency is up to 180Lm/W. Compared to other suppliers 3030 led chips, JR use 5050 led chips, more brighter.
2. Super high luminous efficiency, whole led light output luminous efficiency is more than 150Lm/W, which is 1.5 times higher than other brand LED, to meet the customers' requirements of high luminous flux and less weight with low power. JR 300W LED flood light can replace 1000W metal halide light on the mobile light towers, reduce the cost of an engine & generator.
3. The led tower light is IP67, it's particularly designed for harsh working condition of lighting tower to avoid light decay caused by seeping water, LED chip pollution etc during operation. Strong weather proof for varieties of complex environments use. Most flood lights on the market get IP66 only.
4. Uses an independent light source and ZAG lens technology, compared with similar products, the light efficiency is increased by 8%, and light transmittance reaches 98%.
5. Adopts air duct heat dissipation technology, overall weight is reduced and good heat dissipation performance, reduces luminous depreciation and prolongs the life of the light source.
6. Adopts the mainstream CHEM modular design, effectively reduces maintenance costs for long service. Can freely assemble difference power flood lights with different number of modules for different demands. Modular design are easy for maintenance and Easy for preparing spare parts.
7. Sturdy and durable, long working life, reaching 50,000 hours; does not need frequent light fixture changes, does not need regular maintenance.
8. Quick response, flicker free, wide voltage working range. AC100~277V and DC 24V and DC48V for solar mobile light tower.
9. The LEDs use polycrystalline packaging, high luminous efficiency, stable performance, low luminous depreciation, no damage LED.
10. 25 40 60 90degree bean angle for choose.
11. Different from regular led flood light, JR 304 led flood light processed Electrophoresis spray treatment, can get better anti-corrosion performance.
12. The thickness of bracket is 6mm, thicker than regular led flood light, in order to get the better anti-shock performance on the light towers.

#unit-jXCtpRDfLVGLetj .ce-image_inner{justify-content:center;}#unit-jXCtpRDfLVGLetj .ce-image{--image-effect:1;}

#module-ZWc1d7JbyJ88Z{text-align:center;padding-top:0vw;padding-bottom:0vw;}


#unit-jKWH2bQhXjKqkSU [ce-data-type="text"]{text-align:left;}

led modular flood light


#unit-G1oYgCBEB0DFb6j{padding-top:0vw;}#unit-G1oYgCBEB0DFb6j [ce-data-type="text"]{text-align:left;}

● Uses an independent light source and ZAG lens technology, compared with similar products, the light efficiency is increased by 8%, and light transmittance reaches 98%
● Adopts air duct heat dissipation technology, overall weight is reduced and good heat dissipation performance, reduces luminous depreciation and prolongs the life of the light source
● Adopts the mainstream CHEM modular design, effectively reduces maintenance costs for long service
● Sturdy and durable, long working life, reaching 50,000 hours; does not need frequent light fixture changes, does not need regular maintenance

#unit-QeN7zzjhopW8A4N .ce-image_inner{justify-content:center;}#unit-QeN7zzjhopW8A4N .ce-image{--image-effect:1;}

#module-ZWc1d7JbyJ88Z{text-align:center;padding-top:0vw;padding-bottom:0vw;}



#unit-duHvknNo7HRTOuM [ce-data-type="text"]{text-align:left;}

The lamp's main body uses hollow laser processing to enhance air mobility without accumulating dust to accelerate the light fixture cooling, and effectively reduce the wind resistance when working at high altitude, improves structural safety

#unit-DP2m8iC5fL7IORl [ce-data-type="text"]{text-align:left;}

led flood light cob

#unit-G1oYgCBEB0DFb6j{padding-top:0vw;}#unit-G1oYgCBEB0DFb6j [ce-data-type="text"]{text-align:left;}

● High-intensity optical lens, improved light transmittance
● Highly reliable seal structure design, uses an imported anti-aging silicone rubber sealing ring, IP66 protection rating
● Uses imported high quality LED light source, low luminous depreciation, and high luminous efficiency, stable and durable

#unit-PdCn7Jl0aZEJzmF .ce-image_inner{justify-content:center;}#unit-PdCn7Jl0aZEJzmF .ce-image{--image-effect:1;}

#module-ZWc1d7JbyJ88Z{text-align:center;padding-top:0vw;padding-bottom:0vw;}



#unit-DP2m8iC5fL7IORl [ce-data-type="text"]{text-align:left;}

High mast lights High lumens LED flood light 300W 400W 500W

#unit-G1oYgCBEB0DFb6j{padding-top:0vw;}#unit-G1oYgCBEB0DFb6j [ce-data-type="text"]{text-align:left;}

Fashionable & modern design, aluminum of lamp's main structural parts. Surface electrostatic coating with anti-impact, anti-corrosion and anti-shock functions






#module-4jwMm1KsqrPAF{text-align:center;padding-top:0vw;padding-bottom:0vw;}



#unit-8klkOjUQj4pNfiP [ce-data-type="text"]{text-align:left;}

High mast lights

#unit-H9wFnh5XQAqQsss{padding-top:0vw;}#unit-H9wFnh5XQAqQsss [ce-data-type="text"]{text-align:left;}

The lamp's main body uses hollow laser processing to enhance air mobility without accumulating dust to accelerate the light fixture cooling, and effectively reduce the wind resistance when working at high altitude, improves structural safety






#module-jzqjrhX3p6G4N{text-align:center;padding-top:0vw;padding-bottom:0vw;}



#unit-b5oOoDlZvcMICQy [ce-data-type="text"]{text-align:left;}

High mast lights 300W

#unit-ANvvbcvrtHGFUIp{padding-top:0vw;}#unit-ANvvbcvrtHGFUIp [ce-data-type="text"]{text-align:left;}

Main heat dissipation parts made from ultra-high heat transfer aluminum, processed by a unique forging process with high efficient thermal conductivity and heat dissipation performance, effectively reduces the LED Chip temperature and extends the service life of the LED






#module-5FvPxBh19N4Tc{text-align:center;padding-top:0vw;padding-bottom:0vw;}



#unit-0BlKQR4Kj5dVOwR [ce-data-type="text"]{text-align:left;}

High mast lights 500W

#unit-7hZeUKjhvsCrlD9{padding-top:0vw;}#unit-7hZeUKjhvsCrlD9 [ce-data-type="text"]{text-align:left;}

● High-intensity optical lens, improved light transmittance
● Highly reliable seal structure design, uses an imported anti-aging silicone rubber sealing ring, IP66 protection rating
● Uses imported high quality LED light source, low luminous depreciation, and high luminous efficiency, stable and durable
● High-strength steel bracket, wide range of adjustable light angles

#unit-JoMzKXZgIEWRsQu .ce-image_inner{justify-content:center;}#unit-JoMzKXZgIEWRsQu .ce-image{--image-effect:1;}